A high-quality, low-cost, multi-functional audio baby monitor with breathing & heartbeat sensor pad, temperature sensor, lullaby, colorful night light, and two-way voice, Huizhou Weissida Electronic Technology Co., Ltd. to provide you with a complete solution!
The DECT baby monitor can be used to reliably monitor the baby's environment in the home via a wireless connection. It includes a baby unit and one or two parent units. Both parts use DECT digital technology to acquire digital links and transmit voice.
The main system functions are:
The transmission of sound through a two-way wireless digital system.
Minimum 300 for open working area
Zero interference.
Two parent units (RX) can receive a small unit (TX) of sound at the same time
Easy to use user interface.
Battery door child safety.
Children series (Tx) |
|||
nape |
describe |
Control button/switch | characteristic |
1 |
Power supply: AC/DC 6V 300mA |
NA |
Yes |
2 |
Battery backup :4 x 1.5V alkaline battery |
NA |
option |
3 |
Power on/off control | touch switch | Yes |
4 |
Night light control (time 5 min, battery-powered, and continuous ac/DC adapter in power supply) Volume control buttons (up/Down: 10 levels from minimum to maximum) |
touch switch | option |
5 |
Night light control (time 5 min, battery-powered, and continuous ac/DC adapter in power supply) Volume control buttons (up/Down: 10 levels from minimum to maximum) |
Two touch switches |
Yes |
6 |
Power indicator (two-color LED red/green -- green LED flashing 2 times/second: no link and light: contact with superior unit) |
NA |
Yes |
7 |
Battery low indicator (two-color LED green/red-red light), when the speaker's voice beeps (one beep per second) |
NA |
Yes |
8 |
Built-in microphone and speaker |
NA |
Yes |
9 |
A night light controlled by the parent unit |
NA |
option |
10 |
A night light controlled by the parent unit |
NA |
option |
11 |
A night light controlled by the parent unit |
NA |
option |
12 |
When the baby's unit is off, the current consumed is < 100uA |
NA |
Yes |
Unit 1 and Unit 2 Parents RX1 and RX 2) |
|||
nape | describe | Control button/switch | characteristic |
1 |
Power supply: AC/DC 6V 300mA | touch switch | Yes |
2 |
Battery power: 2xAAA 750mAh rechargeable battery |
NA |
Yes |
3 |
Power on/off control | touch switch | Yes |
4 |
Volume control buttons (up/Down: 10 levels from minimum to maximum) |
Two touch switches |
Yes |
5 |
An intercom button (PTT) | touch switch | Yes |
6 |
Sound level light (4 LED) |
NA |
Yes |
7 |
Power indicator (dual-color LED green/red-green LED) |
NA |
Yes |
8 |
Battery low indicator (two-color LED green/red-red light), when the speaker's voice beeps (one beep per second) |
NA |
Yes |
9 |
LCD Backlight (Press any key to LCD backlight and then turn off 5 seconds later) |
NA |
option |
10 |
Built-in microphone and speaker |
NA |
Yes |
11 |
Out of range function (2 beeps per second - no link after powering on or lost link after 15 seconds) |
NA |
Yes |
12 |
LCD display icon :(1) the battery power of the parent unit; (2) charging state of the parent unit; (3) Rf signal status "Antenna icon"; (4) Link state between infant unit and mother unit; (5) Volume control level |
NA |
option |
13 |
LCD display option function icon :(1) nursery temperature; (2) vibration state; (3) continuous /VOX; (4) Baby unit status of night light |
NA |
option |
14 |
Vibration on/off: When the third sound of the LED lights | touch switch | option |
15 |
"Night light remote control and Continuous /VOX selection mode" control (VOX-1-2-3) | touch switch | option |
16 |
0.1C ~ 0.2C charging current |
NA |
Yes |
17 |
When the parent unit is off, the consumption current is < 800uA |
NA |
Yes |